Vinyl fence panels are usually a less expensive standard wooden picket fencing alternative. Vinyl fencing often comes in, it faster and easier prefabricated sections or panels to install than their wooden counterparts. Routine maintenance vinyl fencing is also much less problems, which can simply be washed with water and wipe with a rag. Once you find the design of the panel vinyl you like, you can probably install the fence around the vinyl in just a couple of days. Buy two messages that are more than you want to be sticking out of the ground feet.
Mark off the vinyl fence panels line. Place a wooden stake eight feet to mark the positions of the fence posts. Use a tape measure to tabulate the total number of posts and panels you need. Dig a hole that is 30 inches deep at each point marked by a wooden stake, using post hole diggers. Make sure the holes are 10 to 12 inches in diameter. Measured from the bottom of the hole at the top with tape to make sure it is deep enough.
12 Photos Gallery of: Installing Vinyl Fence Panels
Vinyl fence panels, fill each post hole six inches of gravel. This will keep the posts sink into the ground and help drain rainwater. Measure the distance from the top of the gravel on top of the hole. Make sure the hole is now 24 inches deep into the gravel. Place the posts in the holes.